85439 Murr Elektronik AC/DC Power Supplies

Weight124 g

SeriesConnector Systems

Input fuse (internal)-

Frequency-

Product article number of manufacturer-

Power factor-

Inrush current after 1 ms-

Input current-

Input voltage-

Parallel usage/serial usage-

Unit protection-

Spikes-

Output current-

Ripple-

Power Boost-

Mains failure bridging time-

LED display-

Standards-

Relative humidity-

Efficiency-

Mounting method-

Protection-

Temperature range-

Dimensions H×W×D-

Output voltage-

Connection-

Product article number of manufacturer-

Temperature range (fixed)-

Temperature range (mobile)-

Cable length-

Bend radius (moving)-

Bend radius (fixed)-

Current load capacity-

Test voltage-

Nominal voltage-

thermal resistance-

chemical resistance-

Color (jacket)-

Shore hardness (jacket)-

Outer-Ø (jacket)-

Material (jacket)-

Material property (jacket)-

Shield-

Color/numbering of wires-

Shore hardness (wire isolation)-

Stranding combination-

Wire-Ø incl. isolation-

Material (wire isolation)-

Construction (core)-

Material property (wire isolation)-

AWG-

Diameter (core)-

Single wire Ø (core)-

Resistor (core)-

Material (wire)-

Cable weight [g/m]-

Temperature range-

Approval (cable)-

Cable Type-

Material (gasket)-

Cable identification-

Pollution Degree-

Material (contact surface)-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Mounting method-

Material-

Locking material-

Protection-

Form-

Operating voltage-

Rated surge voltage-

Operating current per contact-

No. of poles-

Material group-

LED display-

Operating voltage (only UL listed)-

Locking of ports-

Cable length5 m

Torsion speed35 cycles/min

Product article number of manufacturer7000-08081-6300500

No. of torsion cyclesmax. 2 Mio. (25 °C)

No. of bending cycles (C-track)max. 10 Mio. (25 °C)

Torsion stress±180°/m

Travel speed (C-track)max. 3 m/s

Bend radius (moving)10× outer Ø

Current load capacityto DIN VDE 0298-4

Acceleration (C-track)max. 10 m/s²

Bend radius (fixed)5× outer Ø

Temperature range (fixed)-40...+80 °C, (+90 °C at max. 10 000 operating hours)

Temperature range (mobile)-25...+80 °C, (+90 °C at max. 10 000 operating hours)

Test voltage2500 V AC

thermal resistanceflame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2

Nominal voltage300 V AC

Color (jacket)black

chemical resistancegood resistance to oil, gasoline and chemicals (EN 60811-404)

Outer-Ø (jacket)4.1 mm ±5%

Material property (jacket)CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant

Shore hardness (jacket)90 ±5 A

Stranding combination3 wires twisted

Wire-Ø incl. isolation1.25 mm ±5%

Shieldno

Material (jacket)PUR

Color/numbering of wiresbr, bk, bl

Shore hardness (wire isolation)70 ±5 D

Material property (wire isolation)CFC-, halogen-, cadmium-, silicone- and lead-free

AWGsimilar to AWG 24

Material (wire isolation)PP

Construction (core)32× 0.1 mm (multi-strand wire class 6)

Single wire Ø (core)0.1 mm

Resistor (core)max. 79 Ω/km (20 °C)

Diameter (core)3× 0.25 mm²

Cable weight [g/m]26,4 g

Material (wire)Cu wire, bare

Approval (cable)cURus (AWM-Style 20549/10493); CE conform

Cable Type3 (PUR)

Cable identification630

Pollution Degree3

Material (gasket)FKM

Temperature range-25...+85 °C, depending on cable quality

Stripping length (jacket)20 mm

Material (contact surface)Au

Mounting methodinserted, tightened

Material (contact)Copper alloy

StandardsDIN EN 61076-2-104 (M8)

suitable for corrugated tube (internal Ø)6.5 mm

Compression glandM8 (SW9)

Locking materialZinc die casting, matte nickel plated

MaterialPUR

ProtectionIP65, IP66K, IP67 inserted and tightened (EN 60529)

Rated surge voltage1.5 kV

Operating voltage (only UL listed)30 V AC/DC

Material groupIEC 60664-1, category I

LED displayno

Form08081

No. of poles3

Operating current per contactmax. 4 A

Operating voltagemax. 50 V AC/60 V DC

Locking of portsScrew thread (M8×1 mm) recommended torque 0.4 Nm, self-securing

Weight1360 g

SeriesTransformators/Power Supplies

Input fuse (internal)10 A (T)

Frequency50...60 Hz

Product article number of manufacturer85439

Power factor0.94 (230 V AC)

Inrush current after 1 msmax. 11 A (230 V AC)

Input current5.1 A (100 V AC); 2.4 A (240 V AC)

Input voltage85...265 V AC/90...250 V DC

Parallel usage/serial usagemax. 5 units/max. 2 units

Unit protectionshort-circuit and overload protected

Spikesmax. 200 mV ss/pp

Output current10 A

Ripplemax. 50 mV eff/rms

Power BoostIout N × 150% (min. 4 s)

Mains failure bridging timemin. 30 ms (100 V AC); 10 A (48 V DC)

LED displayLED (green): OK; LED (red): overload, overheating or short-circuit

StandardsIEC 61010-2-201, EN 61204-3, EN 55011 B, EN 61000-3-2, SEMI F47

Relative humidity5...95%, no condensation

Efficiency95%

Mounting methodDIN-rail mountable TH35 (EN 60715)

ProtectionIP20

Temperature range-40...+60 °C, ...+70 °C derating (storage temperature -40...+80 °C)

Dimensions H×W×D123×85×138 mm

Output voltage48 V DC (SELV), ±1%; 48...56 V adjustable

ConnectionPush-In spring clamp terminals

Product article number of manufacturer-

Temperature range (fixed)-

Temperature range (mobile)-

Cable length-

Bend radius (moving)-

Bend radius (fixed)-

Current load capacity-

Test voltage-

Nominal voltage-

thermal resistance-

chemical resistance-

Color (jacket)-

Shore hardness (jacket)-

Outer-Ø (jacket)-

Material (jacket)-

Material property (jacket)-

Shield-

Color/numbering of wires-

Shore hardness (wire isolation)-

Stranding combination-

Wire-Ø incl. isolation-

Material (wire isolation)-

Construction (core)-

Material property (wire isolation)-

AWG-

Diameter (core)-

Single wire Ø (core)-

Resistor (core)-

Material (wire)-

Cable weight [g/m]-

Temperature range-

Approval (cable)-

Cable Type-

Material (gasket)-

Cable identification-

Pollution Degree-

Material (contact surface)-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Mounting method-

Material-

Locking material-

Protection-

Form-

Operating voltage-

Rated surge voltage-

Operating current per contact-

No. of poles-

Material group-

LED display-

Operating voltage (only UL listed)-

Locking of ports-

Cable length-

Torsion speed-

Product article number of manufacturer-

No. of torsion cycles-

No. of bending cycles (C-track)-

Torsion stress-

Travel speed (C-track)-

Bend radius (moving)-

Current load capacity-

Acceleration (C-track)-

Bend radius (fixed)-

Temperature range (fixed)-

Temperature range (mobile)-

Test voltage-

thermal resistance-

Nominal voltage-

Color (jacket)-

chemical resistance-

Outer-Ø (jacket)-

Material property (jacket)-

Shore hardness (jacket)-

Stranding combination-

Wire-Ø incl. isolation-

Shield-

Material (jacket)-

Color/numbering of wires-

Shore hardness (wire isolation)-

Material property (wire isolation)-

AWG-

Material (wire isolation)-

Construction (core)-

Single wire Ø (core)-

Resistor (core)-

Diameter (core)-

Cable weight [g/m]-

Material (wire)-

Approval (cable)-

Cable Type-

Cable identification-

Pollution Degree-

Material (gasket)-

Temperature range-

Stripping length (jacket)-

Material (contact surface)-

Mounting method-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Locking material-

Material-

Protection-

Rated surge voltage-

Operating voltage (only UL listed)-

Material group-

LED display-

Form-

No. of poles-

Operating current per contact-

Operating voltage-

Locking of ports-

Weight57 g

SeriesConnector Systems

Input fuse (internal)-

Frequency-

Product article number of manufacturer-

Power factor-

Inrush current after 1 ms-

Input current-

Input voltage-

Parallel usage/serial usage-

Unit protection-

Spikes-

Output current-

Ripple-

Power Boost-

Mains failure bridging time-

LED display-

Standards-

Relative humidity-

Efficiency-

Mounting method-

Protection-

Temperature range-

Dimensions H×W×D-

Output voltage-

Connection-

Product article number of manufacturer7000-88001-0100200

Temperature range (fixed)-30...+80 °C

Temperature range (mobile)-5...+80 °C

Cable length2 m

Bend radius (moving)10× outer Ø

Bend radius (fixed)5× outer Ø

Current load capacityto DIN VDE 0298-4

Test voltage2000 V AC

Nominal voltageUL 300 V AC

thermal resistanceflame retardant UL 1581 VW1 / CSA FT1

chemical resistancegood resistance to oil, gasoline and chemicals

Color (jacket)yellow

Shore hardness (jacket)85 ±5 A

Outer-Ø (jacket)4.5 mm ±5%

Material (jacket)PVC

Material property (jacket)CFC-, cadmium-, silicone- and lead-free

Shieldno

Color/numbering of wiresbr, bk, bl

Shore hardness (wire isolation)45 ±5 D

Stranding combination3 wires twisted

Wire-Ø incl. isolation1.25 mm ±5%

Material (wire isolation)PVC

Construction (core)14× 0.15 mm (multi-strand wire class 5)

Material property (wire isolation)CFC-, cadmium-, silicone- and lead-free

AWGsimilar to AWG 24

Diameter (core)3× 0.25 mm²

Single wire Ø (core)0.15 mm

Resistor (core)max. 79 Ω/km (20 °C)

Material (wire)Cu wire, bare

Cable weight [g/m]29,37 g

Temperature range-25...+85 °C, depending on cable quality

Approval (cable)UL (AWM-Style 2464/1731), CSA

Cable Type1 (PVC)

Material (gasket)FKM

Cable identification010

Pollution Degree3

Material (contact surface)Au

Material (contact)Copper alloy

StandardsDIN EN 61076-2-104 (M8)

suitable for corrugated tube (internal Ø)6.5 mm

Compression glandM8 (SW9)

Mounting methodinserted, tightened

MaterialPUR

Locking materialZinc die casting, matte nickel plated

ProtectionIP65, IP66K, IP67 inserted and tightened (EN 60529)

Form88001

Operating voltagemax. 50 V AC/60 V DC

Rated surge voltage1.5 kV

Operating current per contactmax. 4 A

No. of poles3

Material groupIEC 60664-1, category I

LED displayno

Operating voltage (only UL listed)30 V AC/DC

Locking of portsScrew thread (M8×1 mm) recommended torque 0.4 Nm, self-securing

Cable length-

Torsion speed-

Product article number of manufacturer-

No. of torsion cycles-

No. of bending cycles (C-track)-

Torsion stress-

Travel speed (C-track)-

Bend radius (moving)-

Current load capacity-

Acceleration (C-track)-

Bend radius (fixed)-

Temperature range (fixed)-

Temperature range (mobile)-

Test voltage-

thermal resistance-

Nominal voltage-

Color (jacket)-

chemical resistance-

Outer-Ø (jacket)-

Material property (jacket)-

Shore hardness (jacket)-

Stranding combination-

Wire-Ø incl. isolation-

Shield-

Material (jacket)-

Color/numbering of wires-

Shore hardness (wire isolation)-

Material property (wire isolation)-

AWG-

Material (wire isolation)-

Construction (core)-

Single wire Ø (core)-

Resistor (core)-

Diameter (core)-

Cable weight [g/m]-

Material (wire)-

Approval (cable)-

Cable Type-

Cable identification-

Pollution Degree-

Material (gasket)-

Temperature range-

Stripping length (jacket)-

Material (contact surface)-

Mounting method-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Locking material-

Material-

Protection-

Rated surge voltage-

Operating voltage (only UL listed)-

Material group-

LED display-

Form-

No. of poles-

Operating current per contact-

Operating voltage-

Locking of ports-

Weight124 g

SeriesConnector Systems

Input fuse (internal)-

Frequency-

Product article number of manufacturer-

Power factor-

Inrush current after 1 ms-

Input current-

Input voltage-

Parallel usage/serial usage-

Unit protection-

Spikes-

Output current-

Ripple-

Power Boost-

Mains failure bridging time-

LED display-

Standards-

Relative humidity-

Efficiency-

Mounting method-

Protection-

Temperature range-

Dimensions H×W×D-

Output voltage-

Connection-

Product article number of manufacturer-

Temperature range (fixed)-

Temperature range (mobile)-

Cable length-

Bend radius (moving)-

Bend radius (fixed)-

Current load capacity-

Test voltage-

Nominal voltage-

thermal resistance-

chemical resistance-

Color (jacket)-

Shore hardness (jacket)-

Outer-Ø (jacket)-

Material (jacket)-

Material property (jacket)-

Shield-

Color/numbering of wires-

Shore hardness (wire isolation)-

Stranding combination-

Wire-Ø incl. isolation-

Material (wire isolation)-

Construction (core)-

Material property (wire isolation)-

AWG-

Diameter (core)-

Single wire Ø (core)-

Resistor (core)-

Material (wire)-

Cable weight [g/m]-

Temperature range-

Approval (cable)-

Cable Type-

Material (gasket)-

Cable identification-

Pollution Degree-

Material (contact surface)-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Mounting method-

Material-

Locking material-

Protection-

Form-

Operating voltage-

Rated surge voltage-

Operating current per contact-

No. of poles-

Material group-

LED display-

Operating voltage (only UL listed)-

Locking of ports-

Cable length5 m

Torsion speed35 cycles/min

Product article number of manufacturer7000-08081-6300500

No. of torsion cyclesmax. 2 Mio. (25 °C)

No. of bending cycles (C-track)max. 10 Mio. (25 °C)

Torsion stress±180°/m

Travel speed (C-track)max. 3 m/s

Bend radius (moving)10× outer Ø

Current load capacityto DIN VDE 0298-4

Acceleration (C-track)max. 10 m/s²

Bend radius (fixed)5× outer Ø

Temperature range (fixed)-40...+80 °C, (+90 °C at max. 10 000 operating hours)

Temperature range (mobile)-25...+80 °C, (+90 °C at max. 10 000 operating hours)

Test voltage2500 V AC

thermal resistanceflame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2

Nominal voltage300 V AC

Color (jacket)black

chemical resistancegood resistance to oil, gasoline and chemicals (EN 60811-404)

Outer-Ø (jacket)4.1 mm ±5%

Material property (jacket)CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant

Shore hardness (jacket)90 ±5 A

Stranding combination3 wires twisted

Wire-Ø incl. isolation1.25 mm ±5%

Shieldno

Material (jacket)PUR

Color/numbering of wiresbr, bk, bl

Shore hardness (wire isolation)70 ±5 D

Material property (wire isolation)CFC-, halogen-, cadmium-, silicone- and lead-free

AWGsimilar to AWG 24

Material (wire isolation)PP

Construction (core)32× 0.1 mm (multi-strand wire class 6)

Single wire Ø (core)0.1 mm

Resistor (core)max. 79 Ω/km (20 °C)

Diameter (core)3× 0.25 mm²

Cable weight [g/m]26,4 g

Material (wire)Cu wire, bare

Approval (cable)cURus (AWM-Style 20549/10493); CE conform

Cable Type3 (PUR)

Cable identification630

Pollution Degree3

Material (gasket)FKM

Temperature range-25...+85 °C, depending on cable quality

Stripping length (jacket)20 mm

Material (contact surface)Au

Mounting methodinserted, tightened

Material (contact)Copper alloy

StandardsDIN EN 61076-2-104 (M8)

suitable for corrugated tube (internal Ø)6.5 mm

Compression glandM8 (SW9)

Locking materialZinc die casting, matte nickel plated

MaterialPUR

ProtectionIP65, IP66K, IP67 inserted and tightened (EN 60529)

Rated surge voltage1.5 kV

Operating voltage (only UL listed)30 V AC/DC

Material groupIEC 60664-1, category I

LED displayno

Form08081

No. of poles3

Operating current per contactmax. 4 A

Operating voltagemax. 50 V AC/60 V DC

Locking of portsScrew thread (M8×1 mm) recommended torque 0.4 Nm, self-securing

Weight1360 g

SeriesTransformators/Power Supplies

Input fuse (internal)10 A (T)

Frequency50...60 Hz

Product article number of manufacturer85439

Power factor0.94 (230 V AC)

Inrush current after 1 msmax. 11 A (230 V AC)

Input current5.1 A (100 V AC); 2.4 A (240 V AC)

Input voltage85...265 V AC/90...250 V DC

Parallel usage/serial usagemax. 5 units/max. 2 units

Unit protectionshort-circuit and overload protected

Spikesmax. 200 mV ss/pp

Output current10 A

Ripplemax. 50 mV eff/rms

Power BoostIout N × 150% (min. 4 s)

Mains failure bridging timemin. 30 ms (100 V AC); 10 A (48 V DC)

LED displayLED (green): OK; LED (red): overload, overheating or short-circuit

StandardsIEC 61010-2-201, EN 61204-3, EN 55011 B, EN 61000-3-2, SEMI F47

Relative humidity5...95%, no condensation

Efficiency95%

Mounting methodDIN-rail mountable TH35 (EN 60715)

ProtectionIP20

Temperature range-40...+60 °C, ...+70 °C derating (storage temperature -40...+80 °C)

Dimensions H×W×D123×85×138 mm

Output voltage48 V DC (SELV), ±1%; 48...56 V adjustable

ConnectionPush-In spring clamp terminals

Product article number of manufacturer-

Temperature range (fixed)-

Temperature range (mobile)-

Cable length-

Bend radius (moving)-

Bend radius (fixed)-

Current load capacity-

Test voltage-

Nominal voltage-

thermal resistance-

chemical resistance-

Color (jacket)-

Shore hardness (jacket)-

Outer-Ø (jacket)-

Material (jacket)-

Material property (jacket)-

Shield-

Color/numbering of wires-

Shore hardness (wire isolation)-

Stranding combination-

Wire-Ø incl. isolation-

Material (wire isolation)-

Construction (core)-

Material property (wire isolation)-

AWG-

Diameter (core)-

Single wire Ø (core)-

Resistor (core)-

Material (wire)-

Cable weight [g/m]-

Temperature range-

Approval (cable)-

Cable Type-

Material (gasket)-

Cable identification-

Pollution Degree-

Material (contact surface)-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Mounting method-

Material-

Locking material-

Protection-

Form-

Operating voltage-

Rated surge voltage-

Operating current per contact-

No. of poles-

Material group-

LED display-

Operating voltage (only UL listed)-

Locking of ports-

Cable length-

Torsion speed-

Product article number of manufacturer-

No. of torsion cycles-

No. of bending cycles (C-track)-

Torsion stress-

Travel speed (C-track)-

Bend radius (moving)-

Current load capacity-

Acceleration (C-track)-

Bend radius (fixed)-

Temperature range (fixed)-

Temperature range (mobile)-

Test voltage-

thermal resistance-

Nominal voltage-

Color (jacket)-

chemical resistance-

Outer-Ø (jacket)-

Material property (jacket)-

Shore hardness (jacket)-

Stranding combination-

Wire-Ø incl. isolation-

Shield-

Material (jacket)-

Color/numbering of wires-

Shore hardness (wire isolation)-

Material property (wire isolation)-

AWG-

Material (wire isolation)-

Construction (core)-

Single wire Ø (core)-

Resistor (core)-

Diameter (core)-

Cable weight [g/m]-

Material (wire)-

Approval (cable)-

Cable Type-

Cable identification-

Pollution Degree-

Material (gasket)-

Temperature range-

Stripping length (jacket)-

Material (contact surface)-

Mounting method-

Material (contact)-

Standards-

suitable for corrugated tube (internal Ø)-

Compression gland-

Locking material-

Material-

Protection-

Rated surge voltage-

Operating voltage (only UL listed)-

Material group-

LED display-

Form-

No. of poles-

Operating current per contact-

Operating voltage-

Locking of ports-