7000-12191-2360500 Murr Elektronik Cable Assemblies

Product Details

• Weight
  267 g
• Series
  Connector Systems
• Cable length
  5 m
• Product article number of manufacturer
  7000-12191-2360500
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Torsion stress
  ±180°/m
• Torsion speed
  35 cycles/min
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Travel speed (C-track)
  max. 3 m/s
• Acceleration (C-track)
  max. 10 m/s²
• Bend radius (moving)
  10× outer Ø
• Bend radius (fixed)
  5× outer Ø
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Current load capacity
  to DIN VDE 0298-4
• Test voltage
  2500 V AC
• Nominal voltage
  300 V AC
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Color (jacket)
  gray
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
Shore hardness (jacket)
90 ±5 A
Outer-Ø (jacket)
5.9 mm ±5%
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Material (jacket)
PUR
Stranding combination
3 wires twisted
Color/numbering of wires
bk numbered, gnye longitudinally striped
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Shield
no
Wire-Ø incl. isolation
1.85 mm ±5%
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Shore hardness (wire isolation)
70 ±5 D
AWG
similar to AWG 18
Material (wire isolation)
PP
Material (wire)
Cu wire, bare
Diameter (core)
3× 0.75 mm²
Single wire Ø (core)
0.15 mm
Cable weight [g/m]
56,1 g
Resistor (core)
max. 26 Ω/km (20 °C)
Cable Type
3 (PUR)
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Pollution Degree
3
Cable identification
236
Temperature range
-25...+85 °C, depending on cable quality
Standards
DIN EN 61076-2-101 (M12)
Compression gland
M12 (SW13)
Material
PUR
Locking material
Zinc die casting, matte nickel plated
suitable for corrugated tube (internal Ø)
10 mm
Operating voltage (only UL listed)
max. 30 V AC/DC
Locking of ports
Screw thread (M12×1 mm) recommended torque 0.6 Nm, self-securing
Rated surge voltage
2.5 kV
Form
12191
Operating current per contact
max. 4 A
Protection
IP65, IP66K, IP67
Material group
IEC 60664-1, category I
Coding
A-coded
Operating voltage
max. 125 V AC/DC

7000-12191-2360500 Related Documents