55510 Murr Elektronik I/O Systems

Product Details

• Weight
  1985 g
• Series
  Field Bus System
• Cross-link detection
  Sensor/Actuator
• Monitoring - no voltage
  yes
• Diagnostic via BUS
  per module and channel
• Short-circuit and overload
  yes
• Wire break detection
  yes
• Actuator warning
  per channel via LED and BUS
• Monitoring - under voltage
  yes
• Diagnostic via LED
  per module and channel
• Product article number of manufacturer
  55510
• Communication status
  via LED
• Category
  X0, X1, X2, X3 up to 4, X7 (PIN 3) up to 3
• SIL CL
  up to 3
• Service life
  20 years
• MRP
  yes
• Shared Device
  yes, for 2 controls
• PROFINET Netload Class
  III
• PL
  X0, X1, X2, X3 up to e, X7 (PIN 3) up to d
• SIL
  X0, X1, X2, X3 up to 3, X7 (PIN 3) up to 2
PFH
IEC 62061: 4.8E-9 1/h; IEC 61508: 7.8E-10 1/h
Addressing
DCP
PIN 2
Input/Output (port X4, X5); Input (port X6)
I/O ports
M12, 5-pole, A-coded
Sensor-system/actuator supply
Push Pull Power connector, max. 16 A
PIN 4
Input/Output (port X4, X5); Input (port X6, X7)
Fieldbus
Ethernet 10/100 Mbit/s; Push Pull RJ45 Data connector
Operating modes
COM1; COM2; COM3 (automatic)
IO-Link
2× Master
Port Class
1× Class A; 1× Class B (galvanically separated)
Transfer parameters
32 Byte (In) 32 Byte (Out) per IO-Link port
Temperature range
-20...+60 °C (storage temperature -40...+85 °C)
Specification
IO-Link Master V1.1.2
Dimensions H×W×D
51.2×63×225 mm
Protection
IP67
Actuator supply UA
24 V DC (EN 61131-2), max. 8 A
Sensor supply US
24 V DC (EN 61131-2), max. 700 mA (M12 female), short-circuit and overload protected
Mounting method
2-hole screw mounting
Type
for 3-wire sensors or mechanical switches, PNP, IO-Link Devices
Switching current per output
max. 2 A (short-circuit and overload protected)

55510 Related Documents