159092 Euchner Safety Accessories

Product Details

• Weight
  8.377556 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• B10D
  0,13 x 10⁶
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Performance Level
  PL e
• Product version number
  V3.30.10
• Switching element
  2 pos. driven NC
• Additional feature
  Incl. cover set ID. No. 120344
• Version
  Emergency stop illuminated
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Assignment diagram
  B1
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Fusing
  min.1 A Slow blow
• Assured release distance Sar
  max.65 mm
Transponder coding
Unicode
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Current consumption
max.500 mA
Locking force FZh
2000 N
Guard locking principle
Closed-circuit current principle
Connection
7/8" Power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Switching frequency
0,25 Hz
Degree of protection
IP54
Shock and vibration resistance
In acc. with EN 60947-5-3
Ambient temperature
-20 ... 55 °C
Installation orientation
Door hinge DIN left
Weight
3,1 kg
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶