156310 Euchner Safety Accessories

Product Details

• Weight
  1.757385 lb
• Mission time
  20
• PFHD
  3.45 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Performance Level
  PL e
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +15% (The auxiliary voltage is not required for the MGB system)
• Operating voltage DC
  24 V DC -15% ... +15% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Safety class
  III
• EMC protection requirements
  EMC directive 2014/30/EU
• Connecting cable
  5-pin, M12x1
• Degree of contamination (external, according to EN 60947-1)
  3
• Maximum feed-in current in the connection block
  max.16000 mA
• Rated impulse withstand voltage Uimp
  1,5 kV
• Rated insulation voltage Ui
  75 V
• Current consumption
  max.150 mA
• Number of pins
  5
• Connection type
  Male plug
Type specification
M12 EN 61076-2-101 / A-coded
Insertion cycles
100
Connection
Push-pull RJ45 (XF1 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
Installation orientation
Any
Degree of protection
IP65 (Only in closed state with correctly mounted caps and the connecting cables or the connected modules)
Housing material
Fiber glass reinforced plastic, die-cast zinc, nickel plated
Ambient temperature
-25 ... +55 °C
Weight
0,8 kg
Shock and vibration resistance
In acc. with EN 60947-5-3