136522 Euchner Safety Accessories

Product Details

• Weight
  8.267325 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20 y
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• PFHD
  3.05 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Diagnostic Coverage (DC)
  99
• B10D
  0,13 x 10⁶
• Category
  4
• Performance Level
  PL e
• Product version number
  V1.2
• Switching element
  2 pos. driven NC
• Additional feature
  Incl. cover set ID. No. 120344
• Assignment diagram
  B1
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Assured release distance Sar
  max.65 mm
• Safety data protocol
  CIP Safety
• Bus data protocol
  Ethernet/IP
• Fusing
  min.1 A Slow blow
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Unicode
Connecting cable
Ethernet/IP cable, Cat. 5e min.
Safety class
III
Degree of contamination (external, according to EN 60947-1)
3
Maximum feed-in current in the connection block
max.4000 mA
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated insulation voltage Ui
75 V
Rated impulse withstand voltage Uimp
0,5 kV
Current consumption
max.500 mA
Locking force FZh
2000 N
Guard locking principle
Open-circuit current principle
Connection
M12 Power, A-coded (X1)
Switching frequency
0,25 Hz
Ambient temperature
-20 ... 55 °C
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Installation orientation
Door hinge DIN left
Degree of protection
IP54
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶
Weight
3,1 kg
Shock and vibration resistance
In acc. with EN 60947-5-3