127676 Euchner Safety Accessories

Product Details

• Weight
  8.267325 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20
• B10D
  0,13 x 10⁶
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Category
  4
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• Product version number
  V1.2
• Additional feature
  Incl. cover set ID. No. 120344
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Switching element
  2 pos. driven NC
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Safety data protocol
  CIP Safety
• Assignment diagram
  B0
• Assured release distance Sar
  max.65 mm
• Bus data protocol
  Ethernet/IP
• Fusing
  min.1 A Slow blow
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Transponder coding
Unicode
Safety class
III
Connecting cable
Ethernet/IP cable, Cat. 5e min.
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Rated impulse withstand voltage Uimp
0,5 kV
Locking force FZh
2000 N
Connection
M12 Power, A-coded (X1)
Current consumption
max.500 mA
Degree of contamination (external, according to EN 60947-1)
3
Maximum feed-in current in the connection block
max.4000 mA
Rated insulation voltage Ui
75 V
Guard locking principle
Open-circuit current principle
Reaction time
max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Mechanical life
0,1 x 10⁶
Weight
3,1 kg
Installation orientation
Door hinge DIN right
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Switching frequency
0,25 Hz
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Shock and vibration resistance
In acc. with EN 60947-5-3