126635 Euchner Safety Accessories

Product Details

• Weight
  7.95206434 lb
• Series
  MGB-EI
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• PFHD
  3.37 x 10⁻⁹ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Performance Level
  PL e
• Switching element
  2 pos. driven NC
• Product version number
  V1.2
• Additional feature
  Incl. cover set ID. No. 120344
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Assignment diagram
  B0
• Bus data protocol
  Ethernet/IP
• Safety data protocol
  CIP Safety
• Assured release distance Sar
  max.65 mm
• Fusing
  min.1 A Slow blow
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Auxiliary voltage DC
24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Transponder coding
Unicode
Safety class
III
Connecting cable
Ethernet/IP cable, Cat. 5e min.
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
0,5 kV
Maximum feed-in current in the connection block
max.4000 mA
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Locking force FZh
2000 N
Guard locking principle
Closed-circuit current principle
Shock and vibration resistance
In acc. with EN 60947-5-3
Mechanical life
0,1 x 10⁶
Weight
3,1 kg
Reaction time
max.100 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Degree of protection
IP54
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Connection
M12 D-coded, screened (X3)
Installation orientation
Door hinge DIN right
Switching frequency
0,25 Hz
Ambient temperature
-20 ... 55 °C