124191 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.3747854 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Assured operating distance Sao
  min.9 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.15 mm (These values apply only in approach direction X, center offset m=0.)
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
• B10D
  20 x 10⁶
• Switching frequency, electrical
  max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching delay from state change
  26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Series resistor
  1,5 kΩ
• Switching voltage according to UL
  max.24 V AC/DC
• Switching characteristics
  Parallel
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Method of operation
  Magnetic, reed contact
• Number of NO contacts
  2 NO contacts with fuse, 100 mA each and 1 NO contact with LED
• Switching current
  max.20 mA
• Rated conditional short-circuit current
  100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Number of LED displays
  1 LED contact status indication
• Cable length
  2 m
Connection
Hard-wired encapsulated cable with cable end sleeves 0.25mm²
Switching voltage
24 ... 35 V (DC)
Weight
0,26 kg
Material
PVC
Mechanical life
100 x 10⁶
Design
A
Tightening torque
0,4 ... 0,5 Nm
Ambient temperature
-20 ... 60 °C
Degree of protection
IP67
Installation orientation
Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
Housing material
Fiber glass reinforced PPS