119865 Euchner Safety Accessories

Product Details

• Weight
  0.34392072 lb
• Series
  CES-FD
• Product Class
  Safety System
• Switching hysteresis
  min.0,05 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB)
• Assured operating distance Sao
  min.3,4 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB)
• Assured release distance Sar
  max.10 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB)
• Category
  4
• Operating distance
  5 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB)
• Mission time
  20
• PFHD
  4.5 x 10⁻⁹
• Performance Level
  PL e
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Risk time according to EN 60947-5-3
  max.260 ms
• Utilization category acc. to EN 60947-5-2
  DC-13 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Off-state current Ir
  max.0,25 mA
• Output voltage
  UB-1,5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
• Switching current
  1 ... 150 mA
• Type of output
  Semiconductor outputs, p-switching, short circuit-proof
Safety class
III
Turn-on time
max.400 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Fusing
0,25 ... 8 A
Rated impulse withstand voltage Uimp
1,5 kV
Degree of contamination (external, according to EN 60947-1)
3
Current consumption
max.45 mA
Rated insulation voltage Ui
75 V
Switching frequency
max.1 Hz
Connection
Connection cable PUR with plug connector M12 5-pin, pin 5 not used
Operating voltage DC
24 V DC 15% ... 15% (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the safety outputs.)
Weight
0,096 kg
Installation orientation
Any
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Plastic, PBT
Cable ambient temperature (static)
-20 ... 65 °C
Degree of protection
IP67
Ready delay
1 s
Tightening torque
max.1 Nm
Cable ambient temperature (dynamic)
-5 ... 65 °C