115417 Euchner Safety Locking Systems

Product Details

• Weight
  9.37125 lb
• Mission time
  20
• Product version number
  V3.30.10
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  (According to manufacturer’s specifications)
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• Category
  4
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Switching element
  1NO
• Color
  Yellow
• Assignment diagram
  L0
• Version
  Illuminated push buttons
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Transponder coding
  Multicode
• Assured release distance Sar
  max.65 mm
Safety class
III
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
Maximum feed-in current in the connection block
max.4000 mA
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Locking force FZh
2000 N
Guard locking principle
Open-circuit current principle
Weight
3,1 kg
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Degree of protection
IP54
Installation orientation
Door hinge DIN left
Mechanical life
0,1 x 10⁶
Ambient temperature
-20 ... 55 °C
Switching frequency
0,25 Hz
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)