114943 Euchner Electronic Components

Product Details

• Mission time
  20 y
• Performance Level
  PL e
• PFHD
  1.9 x 10⁻⁹
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Assured release distance Sar
  max.0 mm (For the calculation of safety parameters an s_ar of 0 mm in the door opening direction can be assumed.)
• Output voltage
  0,8 x UB ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
• Switching current
  max.50 mA
• Type of output
  p-switching, short circuit-proof
• Transponder coding
  Multicode
• Risk time according to EN 60947-5-3
  max.400 ms
• Switching load
  DC 24 V, class 2
• Safety class
  III
• Discrepancy time
  10 ms (Maximum time difference between the switching points on the safety outputs FO1A and FO1B)
• Switching delay from state change
  max.400 ms (Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-off delay for the safety outputs after pulling the handle module.)
• Degree of contamination (external, according to EN 60947-1)
  3
• EMC protection requirements
  In acc. with EN IEC 60947-5-3
• Rated impulse withstand voltage Uimp
  0,8 kV
• Rated insulation voltage Ui
  75 V
• Fusing
  0,25 ... 8 A
Utilization category acc. to EN 60947-5-2
DC-13 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Rated conditional short-circuit current
100 A
Current consumption
max.40 mA
Operating voltage
24 V -15 % ... 15 %
Connection
M12 plug connector, 8-pin
Mechanical life
0,1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3
Tightening torque
max.10 Nm
Weight
0,4 kg
Switching frequency
max.0,5 Hz
Degree of protection
IP67
Installation orientation
Any
Housing material
Die-cast aluminum, powder coated, black
Ambient temperature
-20 ... 55 °C