114425 Euchner Safety Accessories

Product Details

• Weight
  8.14166166 lb
• Series
  Spare parts
• Product Class
  Accessories
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• B10D
  0,13 x 10⁶
• Mission time
  20
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Diagnostic Coverage (DC)
  99
• Assignment diagram
  B1
• Version
  Illuminated push buttons
• Performance Level
  PL e
• Switching element
  1NO
• Color
  white
• Category
  4
• Special features
  Printed
• Product version number
  V3.30.10
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Assured release distance Sar
max.65 mm
Fusing
min.1 A Slow blow
Safety class
III
Transponder coding
Unicode
Connecting cable
Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Guard locking principle
Closed-circuit current principle
Rated insulation voltage Ui
75 V
Locking force FZh
2000 N
Connection
7/8" Power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Current consumption
max.500 mA
Degree of protection
IP54
Weight
3,1 kg
Switching frequency
0,25 Hz
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Mechanical life
0,1 x 10⁶
Installation orientation
Door hinge DIN right
Ambient temperature
-20 ... 55 °C
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Shock and vibration resistance
In acc. with EN 60947-5-3