114044 Euchner Safety Accessories

Product Details

• Weight
  7.605939 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• Performance Level
  PL e
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Category
  4
• Product version number
  V3.30.10
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Fusing
  min.1 A Slow blow
• Assured release distance Sar
  max.65 mm
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• EMC protection requirements
  In accordance with EN 61000-4 and EN 61326-3-1
• Degree of contamination (external, according to EN 60947-1)
  3
• Connecting cable
  Profinet I/O cable, at least cat. 5e
• Maximum feed-in current in the connection block
  max.4000 mA
Safety class
III
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Connection
Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Transponder coding
Unicode
Guard locking principle
Open-circuit current principle
Current consumption
max.500 mA
Switching frequency
0,25 Hz
Locking force FZh
2000 N
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance
In acc. with EN 60947-5-3
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Degree of protection
IP54
Weight
3,1 kg
Installation orientation
Door hinge DIN right
Ambient temperature
-20 ... 55 °C
Mechanical life
0,1 x 10⁶