113990 Euchner Safety Accessories

Product Details

• Weight
  7.68089608 lb
• Series
  Spare parts
• Product Class
  Accessories
• Mission time
  20
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Diagnostic Coverage (DC)
  99
• B10D
  0,13 x 10⁶
• Performance Level
  PL e
• Category
  4
• PFHD
  4.07 x 10⁻⁸ (Fixed failure rate without consideration of faults in wearing parts.)
• Product version number
  V3.30.10
• Special features
  With adhesive ring
• Version
  Emergency stop illuminated
• Switching element
  2 pos. driven NC
• Assignment diagram
  B1
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Assured release distance Sar
  max.65 mm
• Fusing
  min.1 A Slow blow
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Transponder coding
Unicode
Operating voltage DC
24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Degree of contamination (external, according to EN 60947-1)
3
Connecting cable
Profinet I/O cable, at least cat. 5e
Safety class
III
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Locking force FZh
2000 N
Rated insulation voltage Ui
75 V
Current consumption
max.500 mA
Guard locking principle
Open-circuit current principle
Connection
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Switching frequency
0,25 Hz
Degree of protection
IP54
Weight
3,1 kg
Installation orientation
Door hinge DIN left
Reaction time
max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Ambient temperature
-20 ... 55 °C
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Mechanical life
0,1 x 10⁶
Shock and vibration resistance
In acc. with EN 60947-5-3