113139 Euchner Safety Proximity Sensors

Product Details

• Weight
  3.2297683 lb
• Series
  CET-AR
• Product Class
  Safety System
• PFHD
  3.1 x 10⁻⁹
• Mission time
  20 y
• Performance Level
  PL e
• Category
  4
• Repeat accuracy R
  10 %
• Turn-on time
  400 ms
• Risk time according to EN 60947-5-3
  max.400 ms
• Discrepancy time
  max.10 ms
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures see operating instructions
• Switching delay from state change
  max.400 ms
• Input voltage
  0 ... 1 V DC
• Off-state current Ir
  max.0,25 mA
• Output voltage
  UB-1,5V ... UB V DC
• Switching current
  1 ... 200 mA
• Extension of risk time according to EN 60947-5-3 per device
  max.5 ms
• Connecting cable
  30V DC, 2A (For UL requirement UL category code (CYJV/CYJV7))
• Safety class
  III
Switching load
24V DC, class 2 (For alternatives see operating instructions)
Degree of contamination (external, according to EN 60947-1)
3
Solenoid duty cycle
100 %
Type of output
2 semiconductor outputs, p-switching, short circuit-proof
Connection rating
11 W
EMC protection requirements
In acc. with EN IEC 60947-5-3
Fusing
0,25 ... 8 A
Solenoid operating voltage DC
24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Current consumption
80 mA
Utilization category acc. to EN 60947-5-2
24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Operating voltage DC
24 V DC -15% ... 10%
Locking force FZh
5000 N (FZH = FMAX/1.3)
Locking force Fmax
6500 N
Guard locking principle
Closed-circuit current principle
Approach speed
max.20 m/min
Connection
2 plug connectors M12, 5 and 8-pin
Switching frequency
max.0,5 Hz
Ready delay
10 s
Installation orientation
Any (Preferably head downward)
Mechanical life
1 x 10⁶
Weight
1 kg
Degree of protection
IP67 (Screwed tight plug connector/mating component)
Ambient temperature
-20 ... 55 °C
Housing material
Die-cast aluminum
Degree of freedom Y
±5 mm
Degree of freedom X
±5 mm
Shock and vibration resistance
In acc. with EN 60947-5-3
Degree of freedom Z
±4 mm