111145 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.32407914 lb
• Series
  CES-AP
• Product Class
  Safety System
• Assured operating distance Sao
  min.18 mm
• Switching hysteresis
  min.1 mm
• Assured release distance Sar
  max.58 mm
• Performance Level
  PL e
• Mission time
  20
• Operating distance
  22 mm (For surface mounting on aluminum. In a non-metallic environment the typical operating distance increases to 30 mm)
• PFHD
  2.1 x 10⁻⁹ (Applying the limit value from EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), BG certifies a PFHd of max. 2.47x10^-8.)
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Rated conditional short-circuit current
  max.100 A
• Off-state current Ir
  max.0,25 mA
• Utilization category acc. to EN 60947-5-2
  24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Output voltage
  UB-1,5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
• Switching current
  1 ... 400 mA
• Safety class
  III
Type of output
Semiconductor outputs, p-switching, short circuit-proof
Turn-on time
max.400 ms
Test pulses
max.0,4 ms
Degree of contamination (external, according to EN 60947-1)
3
Risk time according to EN 60947-5-3
max.260 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Rated impulse withstand voltage Uimp
1,5 kV
Connection
M12 plug connector, 5-pin, pin 5 not used
Current consumption
max.50 mA
Switching frequency
max.1 Hz
Rated insulation voltage Ui
300 V (Tested by employers' liability insurance association up to 75V.)
Fusing
0,25 ... 8 A
Operating voltage DC
24 V DC 15% ... 15% Reverse polarity protected, regulated, residual ripple < 5 %, PELV
Tightening torque
max.1 Nm
Mounting distance
min.40 mm
Degree of protection
IP67
Ambient temperature
-20 ... 55 °C
Ready delay
0,5 s
Installation orientation
Any
Shock and vibration resistance
In acc. with EN 60947-5-3
Weight
0,12 kg
Housing material
Plastic, PBT