110816 Euchner Safety Locking Systems

Product Details

• Weight
  7.7175 lb
• B10D
  0,13 x 10⁶
• Diagnostic Coverage (DC)
  99
• Safety Integrity Level
  SIL 3 (EN 62061:2005)
• Mission time
  20
• PFHD
  4.1 x 10⁻⁸
• Category
  4
• Performance Level
  PL e
• Product version number
  V3.30.10
• Version
  Illuminated push buttons
• Switching element
  1NO
• Safety data protocol
  Profisafe (IEC 61784-3-3)
• Auxiliary voltage DC
  24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
• Fusing
  min.1 A Slow blow
• Operating voltage DC
  24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
• Assignment diagram
  C3
• Bus data protocol
  Profinet (IEC 61158 type 10)
• Color
  white
• Current consumption
  max.500 mA
• Connecting cable
  Profinet I/O cable, at least cat. 5e
Degree of contamination (external, according to EN 60947-1)
3
Safety class
III
EMC protection requirements
In accordance with EN 61000-4 and EN 61326-3-1
Maximum feed-in current in the connection block
max.4000 mA
Rated impulse withstand voltage Uimp
0,5 kV
Rated insulation voltage Ui
75 V
Connection
Push-pull power (X2 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Switching frequency
0,25 Hz
Housing material
Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Reaction time
max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Installation orientation
Any
Degree of protection
IP54
Ambient temperature
-20 ... 55 °C
Weight
2,7 kg
Shock and vibration resistance
In acc. with EN 60947-5-3