110103 Euchner Safety Proximity Sensors

Product Details

• Weight
  2.8439598 lb
• Series
  CET-AR
• Product Class
  Safety System
• Input voltage
  15 ... 27,6 V DC
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures see operating instructions
• Mission time
  20 y
• Category
  Depending on external control of guard locking
• Risk time according to EN 60947-5-3
  max.400 ms
• Discrepancy time
  max.10 ms
• PFHD
  Depending on external control of guard locking
• Turn-on time
  400 ms
• Performance Level
  Depending on external control of guard locking
• Extension of risk time according to EN 60947-5-3 per device
  max.5 ms
• Switching delay from state change
  max.400 ms
• Off-state current Ir
  max.0,25 mA
• Switching current
  1 ... 50 mA
• Output voltage
  0,8xUB ... UB V DC
• Type of output
  p-switching, short circuit-proof
• Degree of contamination (external, according to EN 60947-1)
  3
• Switching load
  24V DC, class 2 (For alternatives see operating instructions)
EMC protection requirements
In acc. with EN IEC 60947-5-3
Connection rating
11 W
Safety class
III
Fusing
0,5 ... 8 A
Solenoid duty cycle
100 %
Utilization category acc. to EN 60947-5-2
24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Solenoid operating voltage DC
24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Ambient temperature
-20 ... 55 °C
Current consumption
80 mA
Operating voltage DC
24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Installation orientation
Any (Preferably head downward)
Switching frequency
max.0,5 Hz
Degree of protection
IP65/IP67 (Screwed tight plug connector/mating component)
Mechanical life
1 x 10⁶
Connection
1 plug connector M23, 19-pin, RC18
Housing material
Stainless steel
Weight
1 kg