109167 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.21605276 lb
• Series
  CES-AP
• Product Class
  Safety System
• Assured release distance Sar
  max.40 mm
• Mission time
  20
• Operating distance
  19 mm
• Assured operating distance Sao
  min.14 mm
• Switching hysteresis
  min.1 mm
• PFHD
  1.8 x 10⁻⁹
• Performance Level
  PL e
• Category
  4
• Repeat accuracy R
  ≤ 10
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  100 A
• Output voltage
  UB - 1,5V ... UB V DC (Values at a switching current of 50mA without taking into account the cable lengths)
• Switching current
  1 ... 150 mA
• Safety class
  III
• Type of output
  Semiconductor outputs, p-switching, short circuit-proof
Test-pulse interval
min.100 ms
Test pulses
max.0,3 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
Risk time according to EN 60947-5-3
max.260 ms
Turn-on time
max.300 ms
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In acc. with EN IEC 60947-5-3
Rated impulse withstand voltage Uimp
1,5 kV
Rated insulation voltage Ui
75 V
Fusing
0,25 ... 8 A
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Switching frequency
max.1 Hz
Utilization category acc. to EN 60947-5-2
24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Connection
Connection cable PUR 0.2m with plug connector M12 5-pin, pin 5 not used
Current consumption
max.30 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Ready delay
0,5 s
Tightening torque
max.1 Nm
Installation orientation
Any
Mounting distance
min.400 mm
Cable ambient temperature (dynamic)
-5 ... 65 °C
Weight
0,06 kg
Degree of protection
IP67
Dynamic bending radius
10 x cable diameter
Housing material
Plastic, PBT
Mounting method
Surface mounting on metal
Cable ambient temperature (static)
-25 ... 65 °C
Static bending radius
5 x cable diameter
Shock and vibration resistance
In acc. with EN 60947-5-3