106738 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.20723428 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured operating distance Sao
  min.9 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.15 mm (These values apply only in approach direction X, center offset m=0.)
• B10D
  20 x 10⁶
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
• Series resistor
  1,5 kΩ
• Switching frequency, electrical
  max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching delay from state change
  26 ms
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching voltage according to UL
  max.24 V AC/DC
• Switching current
  max.15 mA
• Method of operation
  Magnetic, reed contact
• Switching voltage
  24 ... 35 V (DC)
• Rated conditional short-circuit current
  100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Connection
  Hard-wired encapsulated cable with plug connector M12
• Cable length
  0,2 m
• Number of LED displays
  1 LED contact status indication
Ambient temperature
-20 ... 60 °C
Number of NO contacts
2 NO contacts with fuse, 100 mA each and 1 NO contact with LED
Tightening torque
0,4 ... 0,5 Nm
Housing material
Fiber glass reinforced PPS
Design
A
Mechanical life
100 x 10⁶
Installation orientation
Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
Material
PVC
Degree of protection
IP67
Weight
0,055 kg