105747 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.29541908 lb
• Series
  CES-AR
• Product Class
  Safety System
• Performance Level
  PL e
• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.10 mm
• Operating distance
  15 mm
• Category
  4
• Assured release distance Sar
  max.60 mm
• PFHD
  1.9 x 10⁻⁹
• Repeat accuracy R
  ≤ 10
• Rated conditional short-circuit current
  100 A
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Mission time
  20
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Test-pulse interval
  min.140 ms
• Utilization category acc. to EN 60947-5-2
  24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Switching current
  max.50 mA
• Test pulses
  max.1 ms (Applies for a load with C ≤ 30nF and R ≤ 20kOhm)
Output voltage
0,8 x UB ... UB V DC
Risk time according to EN 60947-5-3
max.260 ms
Type of output
p-switching, short circuit-proof
Rated insulation voltage Ui
75 V
Degree of contamination (external, according to EN 60947-1)
3
EMC protection requirements
In acc. with EN IEC 60947-5-3
Turn-on time
max.400 ms
Safety class
III
Current consumption
max.50 mA (Without taking into account the load currents on the monitoring output and the safety outputs)
Rated impulse withstand voltage Uimp
1,5 kV
Connection
Connection cable PUR, length 1m with plug connector M12 8-pin
Operating voltage DC
24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Fusing
0,25 ... 8 A
Installation orientation
Any
Ready delay
10 s
Switching frequency
max.1 Hz
Extension of risk time according to EN 60947-5-3 per device
max.5 ms
Tightening torque
max.1 Nm
Mounting distance
min.120 mm
Dynamic bending radius
10 x cable diameter
Housing material
Plastic, PBT
Cable ambient temperature (static)
-25 ... 65 °C
Cable ambient temperature (dynamic)
-25 ... 65 °C
Weight
0,09 kg
Degree of protection
IP67
Static bending radius
5 x cable diameter
Mounting method
Surface mounting on metal
Shock and vibration resistance
In acc. with EN 60947-5-3