103869 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.57099658 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Assured operating distance Sao
  min.7 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.20 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• Switching frequency, electrical
  max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• B10D
  20 x 10⁶
• Switching delay from state change
  26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
• Switching voltage according to UL
  max.24 V AC/DC
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching characteristics
  Parallel
• Number of NO contacts
  2 NO contacts with fuse, 100 mA each
• Switching current
  max.100 mA
• Switching voltage
  24 ... 35 V (DC)
• Rated conditional short-circuit current
  100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Method of operation
  Magnetic, reed contact
• Degree of protection
  IP67
• Cable length
  5 m
Connection
Hard-wired encapsulated cable with cable end sleeves 0.34mm²
Tightening torque
0,4 ... 0,5 Nm
Weight
0,25 kg
Installation orientation
Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
Mechanical life
100 x 10⁶
Housing material
Fiber glass reinforced PPS
Ambient temperature
-20 ... 60 °C
Design
B
Material
PUR