102275 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.16755112 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Assured operating distance Sao
  min.9 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.22 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• B10D
  20 x 10⁶
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
• Switching voltage according to UL
  max.24 V AC/DC
• Switching delay from state change
  26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching frequency, electrical
  max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching current
  max.100 mA
• Switching characteristics
  Parallel
• Switching voltage
  24 ... 35 V (DC)
• Design
  A
• Ambient temperature
  -20 ... 60 °C
• Degree of protection
  IP67
• Housing material
  Fiber glass reinforced PPS
• Installation orientation
  Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Rated conditional short-circuit current
100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Method of operation
Magnetic, reed contact
Connection
4-pin M8 plug connector
Number of NO contacts
2 NO contacts with fuse, 100 mA each
Tightening torque
0,4 ... 0,5 Nm
Weight
0,038 kg
Mechanical life
100 x 10⁶