100753 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.16755112 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Assured operating distance Sao
  min.7 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Assured release distance Sar
  max.20 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• B10D
  20 x 10⁶
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
• Switching delay from state change
  26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching characteristics
  Parallel
• Switching frequency, electrical
  max.5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching voltage according to UL
  max.24 V AC/DC
• Switching voltage
  24 ... 35 V (DC)
• Switching current
  max.100 mA
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Rated conditional short-circuit current
  100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Method of operation
  Magnetic, reed contact
• Design
  B
• Housing material
  Fiber glass reinforced PPS
• Installation orientation
  Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
Degree of protection
IP67
Connection
4-pin M8 plug connector
Mechanical life
100 x 10⁶
Tightening torque
0,4 ... 0,5 Nm
Ambient temperature
-20 ... 60 °C
Number of NO contacts
2 NO contacts with fuse, 100 mA each
Weight
0,016 kg