099905 Euchner Limit Switches

Product Details

• Weight
  2.105775 lb
• Additional information
  Exterior diaphragm = AM (The exterior diaphragm provides additional protection to the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this exterior diaphragm version.)
• Display module
  24 V 21,6 ... 26,4 V LED yellow
• Switching current
  min.10 mA
• Rated impulse withstand voltage Uimp
  2 kV
• Rated insulation voltage Ui
  60 V
• Short circuit protection according to IEC 60269-1
  4A gG
• Thermal rated current Ith
  4 A
• Utilization category acc. to EN 60947-5-1
  5A 24V
• Operating point accuracy
  ± 0.002 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Actuating force
  min.20 N
• Actuating element
  Chisel plunger
• Approach speed
  0,01 ... 20 m/min
• Connection
  1 x plug connector RC18 (Coninvers RC18, 19-pin (18+PE). Not adjustable. Cable outlet for angle plug connector to rear.)
• Installation orientation
  Any
• Number of NC contacts
  4
• Number of NO contacts
  4
• Number of switching elements
  4
• Switching principle
  Snap-action switching contact
• Plunger spacing
  12 mm
Contact material
Silver alloy, gold flashed
Degree of protection
IP65 (Only screwed tight with the related mating connector.)
Housing material
Die-cast aluminum, anodized
Contact closing time
< 4ms
Mechanical life
30 x 10⁶
Ambient temperature
-5 ... 70 °C
Weight
1 kg
Contact bounce time
< 3ms
Design
Upright, according to DIN 43697