098941 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.4188778 lb
• Series
  CES-AR
• Product Class
  Safety System
• Switching hysteresis
  min.1 mm
• Assured operating distance Sao
  min.18 mm
• Assured release distance Sar
  max.58 mm
• Operating distance
  22 mm (For surface mounting on aluminum. In a non-metallic environment the typical operating distance increases to 30 mm)
• Performance Level
  PL e
• Mission time
  20
• PFHD
  2.1 x 10⁻⁹
• Category
  4
• For the approval acc. to UL the following applies
  Operation only with UL class 2 power supply, or equivalent measures
• Repeat accuracy R
  ≤ 10
• Discrepancy time
  max.10 ms
• Off-state current Ir
  max.0,25 mA
• Rated conditional short-circuit current
  max.100 A
• Utilization category acc. to EN 60947-5-2
  24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
• Test pulses
  max.1 ms
• Switching current
  max.200 mA
• Output voltage
  0,8 x UB ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
Type of output
p-switching, short circuit-proof
Risk time according to EN 60947-5-3
max.260 ms
Safety class
III
Turn-on time
max.400 ms
EMC protection requirements
In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)
3
Rated impulse withstand voltage Uimp
1,5 kV
Fusing
0,25 ... 8 A
Rated insulation voltage Ui
300 V (Tested by BG up to 75V)
Current consumption
max.50 mA
Switching frequency
max.1 Hz
Operating voltage DC
24 V DC 15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Extension of risk time according to EN 60947-5-3 per device
max.5 ms
Connection
M12 plug connector, 8-pin
Ready delay
10 s
Weight
0,12 kg
Installation orientation
Any
Housing material
Plastic, PBT
Mounting distance
min.40 mm
Degree of protection
IP67
Tightening torque
max.1 Nm
Ambient temperature
-20 ... 55 °C
Shock and vibration resistance
In acc. with EN 60947-5-3