097368 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.4078547 lb
• Series
  CMS read heads
• Product Class
  Safety System
• Assured release distance Sar
  max.20 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• Assured operating distance Sao
  min.7 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Center offset
  2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013
• Switching delay from state change
  26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• B10D
  20 x 10⁶
• Switching frequency, electrical
  max.0,1 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Switching voltage according to UL
  max.24 V AC/DC
• Switching characteristics
  Parallel
• Switching voltage
  24 ... 35 V (DC)
• Switching current
  max.100 mA
• Rated conditional short-circuit current
  100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Fusing
  Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
• Connection
  Hard-wired encapsulated cable with cable end sleeves 0.34mm²
• Mechanical life
  100 x 10⁶
• Method of operation
  Magnetic, reed contact
• Cable length
  3 m
Number of NO contacts
2 NO contacts with internal fuse 100 mA each
Weight
0,16 kg
Material
PVC
Ambient temperature
-20 ... 60 °C
Tightening torque
0,4 ... 0,5 Nm
Housing material
Fiber glass reinforced PPS
Installation orientation
Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
Design
B
Degree of protection
IP67