096067 Euchner Limit Switches

Product Details

• Weight
  1.783845 lb
• Additional information
  Mixed contact assembly (On upright multiple limit switches it is necessary to start with the safety station/s on the flange side. If several safety stations are to be fitted, these must be fitted directly one after the other.)
• Switching current
  min.10 mA (Applies for station 1 with switching element ES508)
• B10D
  20 x 10⁶
• Rated impulse withstand voltage Uimp
  2,5 kV
• Rated insulation voltage Ui
  250 V
• Connection cross-section
  0,34 ... 1,5 mm²
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Thermal rated current Ith
  8 A
• Actuating force
  min.20 N
• Approach speed
  0,01 ... 40 m/min
• Short circuit protection according to IEC 60269-1
  8A gG
• Actuating element
  Chisel plunger (Operating point accuracy ± 0.002. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Connection
  M25 x 1.5
• Number of NO contacts
  3
• Number of NC contacts
  3
• Number of switching elements
  4
• Number of positively driven contacts
  1
• Installation orientation
  Any
• Ambient temperature
  -5 ... 80 °C
Housing material
Die-cast aluminum, anodized
Plunger spacing
16 mm
Switching principle
Slow-action switching contact (Applies for station 1 with switching element ES508)
Weight
0,95 kg
Design
Upright
Contact material
Silver alloy, gold flashed
Degree of protection
IP67
Mechanical life
30 x 10⁶