095051 Euchner Limit Switches

Product Details

• Weight
  0.385875 lb
• Switching current
  min.10 mA
• Additional information
  Housing without earth conductor! (All the electrical connections must either be isolated from the mains supply by a safety transformer according IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.
• Utilization category acc. to EN 60947-5-1
  2A 30V
• Rated insulation voltage Ui
  50 V
• Rated impulse withstand voltage Uimp
  2,5 kV
• Short circuit protection according to IEC 60269-1
  2A gG
• Operating point accuracy
  ± 0.02 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 552 has been run-in with approx. 2000 operating cycles.)
• Operating point
  3 2,5 ... 3,5
• Actuating element
  Chisel plunger
• Approach speed
  0,01 ... 20 m/min
• Actuating force
  min.15 N
• Number of changeover contacts
  2
• Number of switching elements
  2
• Connection
  1 x plug connector M12 (4-pin, not adjustable. Only for straight mating connectors. Mounted on left.)
• Installation orientation
  Any
• Design
  Upright
• Mechanical life
  10 x 10⁶ (Switching element)
• Contact material
  Pure silver (Ag)
• Switching principle
  Snap-action switching contact
Plunger spacing
8 mm
Weight
0,14 kg
Degree of protection
IP67 (Only screwed tight with the related mating connector)
Ambient temperature
-5 ... 80 °C
Housing material
Die-cast aluminum, anodized