093975 Euchner Safety Proximity Sensors

Product Details

• Weight
  0.641655 lb
• Assured release distance Sar
  max.23 mm (The assured switch-off distance s_ar corresponds to the reset distance.)
• Assured operating distance Sao
  min.9 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
• Operating distance
  min.7 mm (These values apply only in approach direction X, center offset m=0.)
• Release distance
  max.15 mm (These values apply only in approach direction X, center offset m=0.)
• Switching characteristics
  Parallel
• In compliance with
  EN ISO 13849-1:2015; EN 50178:1997; EN 60204-1:2006/A1:2009; EN ISO 14119:2013; EN 61000-6-2:2005; EN 61000-6-3:2007/A1:2011; EN 60947-5-3:2013
• Repeat accuracy R
  max.10 %
• Series resistor
  1,5 kΩ
• Switching voltage
  24 V (Also applies to contact status indication)
• Degree of contamination (external, according to EN 60947-1)
  2
• Switching current
  15 mA
• Method of operation
  Magnetic, reed contact
• Rated impulse withstand voltage Uimp
  1,5 kV
• Rated insulation voltage Ui
  26,4 V
• Connection
  Hard-wired encapsulated cable with cable end sleeves, 0.25mm²
• Cable length
  5 m
• Number of LED displays
  1 LED contact status indication
• Number of NO contacts
  3 NO contacts and 1 NO contact with LED
• Tightening torque
  0,4 ... 0,5 Nm
Degree of protection
IP67
Ambient temperature
-20 ... 60 °C
Weight
0,225 kg
Housing material
Fiber glass reinforced PPS
Shock and vibration resistance
In acc. with EN 60947-5-3
Material
PVC
Installation orientation
Any, pay attention to marking (During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other.)
Mechanical life
100 x 10⁶
Design
A