090542 Euchner Limit Switches

Product Details

• Weight
  0.518175 lb
• Connection cross-section
  0,34 ... 1,5 mm²
• Additional information
  Exterior diaphragm = AM (The exterior diaphragm provides additional protection to the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this exterior diaphragm version.)
• Switching current
  10 mA
• Rated impulse withstand voltage Uimp
  2,5 kV
• Rated insulation voltage Ui
  250 V
• Short circuit protection according to IEC 60269-1
  8A gG
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Number of NO contacts
  1
• Thermal rated current Ith
  8 A
• Approach speed
  0,01 ... 20 m/min
• Actuating element
  Chisel plunger
• Operating point accuracy
  ± 0.002 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Actuating force
  min.20 N
• Connection
  M16 x 1.5
• Number of switching elements
  1
• Number of NC contacts
  1
• Mechanical life
  30 x 10⁶
• Installation orientation
  Any
• Switching principle
  Snap-action switching contact
Contact material
Silver alloy, gold flashed
Contact bounce time
< 3ms
Contact closing time
< 4ms
Degree of protection
IP67
Design
Housing according to DIN 43693
Ambient temperature
-5 ... 80 °C
Weight
0,25 kg
Housing material
Anodized die-cast alloy