089550 Euchner Limit Switches

Product Details

• Weight
  1.27449 lb
• Short circuit protection according to IEC 60269-1
  8A gG
• Utilization category acc. to EN 60947-5-1
  6A 50V
• Additional information
  Housing without earth conductor! (All the electrical connections must either be isolated from the mains supply by a safety transformer according IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.
• Rated impulse withstand voltage Uimp
  2 kV
• Switching current
  min.10 mA
• Rated insulation voltage Ui
  50 V
• Operating point accuracy
  ± 0.002 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Actuating force
  min.20 N
• Actuating element
  Chisel plunger
• Number of switching elements
  2
• Connection
  1 x plug connector Han Q5/0 (Harting plug connector(s) Han Q5/0, 5-pin, only pins 1, 3 and 4 used, with cable 3,000 mm (3x0.75 mm²). Mounted on right.)
• Number of NO contacts
  2
• Approach speed
  0,01 ... 40 m/min
• Number of NC contacts
  2
• Installation orientation
  Any
• Plunger spacing
  12 mm
• Contact material
  Silver alloy, gold flashed
• Switching principle
  Snap-action switching contact
• Contact bounce time
  < 3
Mechanical life
30 x 10⁶
Contact closing time
< 4
Ambient temperature
-5 ... 80 °C
Design
Upright
Housing material
Die-cast aluminum, anodized
Weight
0,5 kg
Degree of protection
IP67 (Only in the inserted state, with the related mating connector)