088766 Euchner Limit Switches

Product Details

• Weight
  1.316385 lb
• Switching current
  min.10 mA
• Connection cross-section
  0,34 ... 1,5 mm²
• Rated impulse withstand voltage Uimp
  2,5 kV
• Additional feature
  (Exterior diaphragm = AM. The exterior diaphragm provides additional protection to the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this exterior diaphragm version.)
• Actuating element
  Roller plunger (d roller = 5. Operating point accuracy ± 0.01. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Rated insulation voltage Ui
  250 V
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Short circuit protection according to IEC 60269-1
  8A gG
• Connection
  M20 x 1.5
• Thermal rated current Ith
  8 A
• Design
  Upright
• Installation orientation
  Any
• Number of NO contacts
  6
• Approach speed
  0,01 ... 50 m/min
• Actuating force
  min.20 N
• Number of switching elements
  6
• Number of NC contacts
  6
• Plunger spacing
  12 mm
• Contact material
  Silver alloy, gold flashed
Mechanical life
30 x 10⁶
Degree of protection
IP67
Housing material
Die-cast aluminum, anodized
Switching principle
Snap-action switching contact (Contact closing time < 4 ms contact bounce time < 3 ms)
Ambient temperature
-5 ... 80 °C
Weight
0,65 kg