087190 Euchner Electronic Components

Product Details

• Switching current
  min.10 mA
• Rated insulation voltage Ui
  250 V
• Rated impulse withstand voltage Uimp
  2,5 kV
• Connection cross-section
  0,34 ... 1,5 mm²
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Operating point accuracy
  ± 0.2 (The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Actuating element
  Domed plunger (Attention: On side approach reduced mechanical life is to be expected.)
• Short circuit protection according to IEC 60269-1
  8A gG
• Thermal rated current Ith
  8 A
• Actuating force
  min.20 N
• Approach speed
  0,01 ... 10 m/min
• Number of NC contacts
  2
• Switching principle
  Snap-action switching contact
• Connection
  M20 x 1.5
• Number of NO contacts
  2
• Installation orientation
  Any
• Plunger spacing
  12 mm
• Contact material
  Silver alloy, gold flashed
• Number of switching elements
  2
• Ambient temperature
  -25 ... 60 °C
Degree of protection
IP40
Mechanical life
30 x 10⁶
Weight
0,4 kg
Design
Upright
Housing material
Die-cast aluminum, anodized
Contact bounce time
< 3ms
Contact closing time
< 4ms