086584 Euchner Limit Switches

Product Details

• Weight
  0.721035 lb
• Additional feature
  (Exterior diaphragm = AM. The exterior diaphragm provides additional protection to the plunger guide. Plunger sticking, primarily caused by resinous lubricating coolants, can be prevented by this exterior diaphragm version.)
• Connection cross-section
  0,34 ... 1,5 mm²
• Rated impulse withstand voltage Uimp
  2,5 kV
• Utilization category acc. to EN 60947-5-1
  6A 230V
• Switching current
  min.10 mA
• Rated insulation voltage Ui
  250 V
• Short circuit protection according to IEC 60269-1
  8A gG
• Thermal rated current Ith
  8 A
• Approach speed
  0,01 ... 20 m/min
• Number of switching elements
  2
• Actuating element
  Chisel plunger (Operating point accuracy ± 0.002. The reproducible switching point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2000 operating cycles.)
• Connection
  M20 x 1.5
• Actuating force
  min.20 N
• Number of NC contacts
  2
• Number of NO contacts
  2
• Installation orientation
  Any
• Degree of protection
  IP67
• Housing material
  Die-cast aluminum, anodized
• Weight
  0,4 kg
Contact material
Silver alloy, gold flashed
Design
Upright
Switching principle
Snap-action switching contact (Contact closing time < 4 ms contact bounce time < 3 ms)
Ambient temperature
-5 ... 80 °C
Plunger spacing
12 mm
Mechanical life
30 x 10⁶