085613 Euchner Safety Relays

Product Details

• Weight
  0.4629702 lb
• Series
  ESM
• Product Class
  safety relay
• Mission time
  20 y (This value is dependent on the number of switching cycles and the switching current.)
• Number of switching cycles
  max.500000 1/Jahr
• PFHD
  1.2 x 10⁻⁸ (This value is dependent on the number of switching cycles and the switching current.)
• Category
  4 (This value is dependent on the number of switching cycles and the switching current.)
• Performance Level
  PL e (This value is dependent on the number of switching cycles and the switching current.)
• Breaking capacity according to UL
  8A 250V AC / 3A 24V DC per contact
• In compliance with
  EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN 50581: 2012 (RoHS)
• Utilization category acc. to EN 60947-5-1
  3A , 250V
• Cumulative current
  max.15 A For all contacts (If several ESM-BA3.. devices are closely spaced under load, the max. cumulative current at the ambient temperature of T=20°C is 9A; at T=30°C is 3A; at T=40°C is 1A. If these currents are exceeded, a spacing of 5mm between th
• Switching current
  min.5 mA
• Fusing
  10A gG
• Switching voltage
  max.250 V
• Type of output
  Relay contacts, floating and positively driven (redundant) (Positively driven relay according to EN 50205)
• LED indicator
  2 status displays (green) for relays K1 and K2
• Degree of contamination (external, according to EN 60947-1)
  2
• Control voltage
  24 V 18,6 ... 26 V Start button
• Rated impulse withstand voltage Uimp
  4 kV
Test voltage
2,5 kV
Control current
60 mA
Overvoltage category according to IEC EN 60664-1
3
Connection cross-section
0,14 ... 2,5 mm² (Connection terminal (size))
Connection rating
2,3 W
Rated supply frequency
50 ... 60 Hz
Rated insulation voltage Ui
250 V
Mechanical life
10 x 10⁶
Housing material
Polyamide PA6.6
Connection
Connection terminals
Weight
0,23 kg
Operating voltage
24 V -10% ... +10% (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
Number of auxiliary contacts
1
Number of safety contacts
3
Contact material
AgSnO₂
Degree of protection
IP20
Mounting method
Mounting rail 35mm according to DIN EN 60715 TH35
Ambient temperature
-15 ... 40 °C (If several ESM-BA3.. devices are closely spaced under load, the max. cumulative current at the ambient temperature of T=20°C is 9A; at T=30°C is 3A; at T=40°C is 1A. If these currents are exceeded, a spacing of 5mm between the devices must
Length of control cable
1000 m