077805 Euchner Safety Accessories

Product Details

• Weight
  0.85554 lb
• Read distance
  12 ... 20 ... 28 mm (It is necessary to maintain the minimum distance on the approach of the data carrier from the side if the data must be transferred correctly to the read head in one transmission.)
• Center offset
  -13 ... 13 mm
• Approach speed
  max.13,8 m/min (Reduction for each additional hexadecimal digit (at sL = 20mm and mL = 0 mm) 1.5 m/min)
• Input voltage
  min.15 V DC SKIP input HIGH level
• Data interface
  4 bit binary coded + strobe
• Resistance
  4,5 kΩ Input resistance
• Output voltage
  max.2 V DC For LOW level
• Operating voltage DC
  20 ... 28 V DC (All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
• Current consumption
  80 ... 100 mA Without load
• Housing material
  Plastic
• Type of output
  Push-Pull
• Switching current
  -30 ... +30 mA Per output
• Connection
  M12 plug, 8-pin, axial connection (The screen on the connection cable is connected to the read head's screen bonding clamp via the knurled nut on the M12 plug connector.)
• Mounting method
  Surface
• Ambient temperature
  0 ... 50 °C
• Degree of protection
  IP65